Wednesday 4 December 2013

Duplication

Time to start on the cabin. Here you can see the panel which will become the inside of the starboard cabin. This piece was cut at the same time as the port cabin with the two pieces of ply screwed together.
You can just make out the pencil lines of the grid drawn to get the cabin top curve so I hopefully will end up with a duplicate of the port cabin shape.


Here are the first stringers to go on the aft part of the cabin.


And here the inside of the cabin is glued in place and the shape of the roof will be matched to this curve.


Posted by at

2 comments:

  1. Bryan7 December 2013 at 08:43

    the boat is coming along well Rodney. Is it going to be a race between you and Hardy to be sailing first
    regds
    Bryan

    ReplyDelete
    Replies
    1. Rodney7 December 2013 at 08:50

      Yeah. It's coming along. Hardy looks like he might be ready for the northern summer so could be first. I'm planning on our next summer. Either way it will be good to find out how the KD650 sails.

      Delete

Subscribe to: Post Comments (Atom)